1:12 Scale Classic/Freedom Series 3D Printed Model Horse Ears for Customizing

Description

We've all been there. You drop a model and the ear breaks off, or you want a different expression on that custom you're doing, but sculpting ears is difficult and tedious, and you just can't seem to get them looking exactly the way you wanted, even following the many tutorials online on how pro sculptors construct their ears. Or, you just don't have the patience to bother spending the next four hours shaping, setting, and trying to match the sizes of the seventeen pairs of ears you inevitably make, because just like it's hard to draw the other eye in a human portrait, it's incredibly difficult to get two ears that look like they belong to the same horse.
I get it.
I hate it, too. That's why I sculpted these, and am now offering them to you!
Each unit comes with 1 pair of ears
, and orders with more than one unit will be condensed into as few containers as possible to save on plastic waste (up to 6 pairs per container.) Both ears are symmetrical, and can be posed at any angle you want!
Every ear is 3D printed at a 20 micron layer height using a custom mix of resins to give the best of both detail, and durability. While they aren't drop-proof, they are much more resistant to being crushed, snapped, or chipped than standard printing resin, so you don't have to worry about them crumbling in your hands while you hold them in place for the glue to set. (Nobody likes that!)
Each batch is thoroughly washed in 99% isopropyl alcohol, left to dry, and then properly cured for a minimum of 15 minutes (per specific resin requirements) in a dedicated resin cure station. No goo, no stick, no toxic uncured resin. You can handle them with your bare hands with confidence!
Please feel free to contact me if you have any questions. I'll be happy to help in any way I can!