Super Jet Black Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit

Description

You are looking at
A Complete Auto Paint Kit that will give you the High Quality Finish !
What you will receive it this urethane base coat clear coat kit is:
1 - Quart of Super
Jet Black premium urethane base coat(APPBC SERIES)
1 -
Quart
of Medium Urethane Reducer
( APPURI 70-G )
1 -
Quart
of
extra high gloss urethane clear coat (APP150)
1 - Half Pint of Urethane Hardener
(APP151)
3 - EA Quality 190 Micron Nylon Automotive Strainers
3 - EA Wood Paint Mixing Sticks
1 - Quart mixing cup
APPBC (Auto Paint Pro Base Coat), Series Urethane Base coat
APPBC - Series Urethane Base coat is a quick dry, good hiding, factory pack line of many popular colors.
Various OEM colors are available. Ideal for overalls, large blend area repairs, or for ground-coat material.
For a complete and current list of colors offered, please visit
Auto Paint Pro Online.
Application
For dry sanding, a final sanding step of P500-P600 grit is recommended using a maximum 100 grit step difference or less throughout the taken sanding steps.
For wet sanding, a final sanding step of P800-P1000 grit is recommended using a maximum of 200 grit step difference or less throughout the sanding steps.
Clean area with a good grade wax and grease remover and wipe dry with a clean cloth.
Wipe area with tack cloth to remove any dust or dirt particles.
Mixing Directions
1 Part APPBC - Series  Base coat
1 Part APPUR - Series Universal Reducer
Spray Gun Set-up
Spray Gun: Fluid tip: Application pressure:
Gravity feed 1.3-1.5mm 30 PSI at the spray gun air inlet
Gravity feed HVLP 1.3-1.5mm 10 PSI max at air cap
Siphon feed 1.6-1.8mm 40-50 PSI
Application
Apply 2 - 4 single coats or until full coverage is achieved.
Drying Schedule
Allow each coat to flash off for approximately 5 to 10 minutes at 70°F.
Prior to clear coat application, allow a minimum of 20minutes flash time at 70°F and a maximum of 24 hours flash time at 70°F.
Should this maximum time be exceeded, scuff surface and apply another coat.
Can be catalyzed up to 10% of unreduced color portion with a base coat hardener or another isocyanate hardener.
Cleaning of Equipment
Clean equipment with lacquer thinner.